|
Fine Feed Milling Cum Drill Machine DESIGN FEATURES:
- Main spindle made from alloy steel with 6 slots is machined by hobber machine and MT-Bore is provided internally grinded by internal grinding machine.
- Provides 8 Speeds by accurate balanced pairs of cone pulleys, which runs on two ball bearings.
- Spindle sleeve is properly grinded and hardened is guided in honned, Drill head bore spindle is mounted on five ball & bearing for smooth and accurate running.
- by simple adjustment of only tapper wedge facility to set drill head on arm guide way.
- Top cover provided with window for changing gears and setting V-Belt for desired R.P.M.
- Lever facility for V-Belt tension.
- Gear made from best quality material are helical teethed on imported hobbing machine for smooth and noiseless running.
- Piller & other parts being provided in machine are ground and finished by WMW GERMAN MAKE GRINDING MACHINE.
- Grinding are provided on protector for swivelling of radial arm to required degree.
- Automatic adjustable depth control.
- Auto as well as manual feeds.
Siddhapura is a well known drilling machine which has a sturdy built up and is designed for both the production tool room job. The machine covers the varied range of operation like Drilling, Reaming, Tapping, Boring and Lapping in cast iron, steel and other Materials. SPECIAL FEATURES :
- Important parts are made from close graded Casting.
- Main Spindle made from EN Steel.
- Main Spindle run out of tolerance as per IS : 2199.
- Gears are made from best quality material and teeth formed on gear hobbing.
- Precision anti-friction bearing for all rotating mambers.
- All the main parts are Ground Finish.
SI - 3M
|
In : Drilling
|
40mm
|
|
Cast : Face Mill
|
25mm
|
|
:Tapping
|
22mm
|
|
In Mild steel drilling
|
35mm
|
|
Column Diameter
|
130mm
|
|
Swing
|
610mm
|
|
Working Surface
|
435 x 200mm
|
|
Longitudinal Travel Manual
|
325mm
|
|
Cross Travel
|
250mm
|
|
Vertical Travel
|
400mm
|
|
Quill Travel
|
220mm
|
|
Spindle Taper
|
MT - 4
|
|
Range Of Spindle Speed
|
75 to 2070RPM
|
|
No. Of Spindle Speed
|
8
|
|
Distance Spindle To Base
|
940mm
|
|
Base Size (Machine Area)
|
490 x 470mm
|
|
Overall Height With Guard
|
1830mm
|
|
Main Electrical Motor
|
1.5HP
|
|
V-belt Section
|
B-62
|
|
Shipping Case (I x W x H)
|
1140 x 800 x 1950mm
|
STANDARD ACCESSORIES : Motor Pulley, Drift Key, Milling Collet Adapters.
OPTIONAL ACCESSORIES : Collant Pump, Electrical Motor, Starter.
|
